Cast Steel Swing Check Valves

VERVO swing check valve consists of a flap or disc which hangs down in the flow path. With flow in the forwards direction, the pressure of the fluid forces the disc to swing upwards, allowing flow through the valve. Reverse flow will cause the disc to shut against the seat and stop the fluid going back down the pipe. In the absence of flow, the weight of the flap is responsible for the closure of the valve.

VERVO Material:
WCB,LCB,WC6,WC9,CF8,CF8M,CF3,CF3M,CF8C, CN7M

No	Part Name	Carbon steel	l1/4cr-1/2mo	Carbon Steel
1	Body	A216-WCB	A217-WC6	A352-LCB
2	Cover	A216-WCB	A217-WC6	A352-LCB
3	Disc1)	A105-CR13	A182-F11+HF	A350-LF2+CR13
4	Hinge	A216-WCB	A217-WC6	A352-LCB
5	Fork Part	A216-WCB	A217-WC6	A352-LCB
6	Seat Ring	A105+CR13	A182-F11+HF	A350-LF2+CR13
7	Hinge Pin	A276-420	A276-304	A276-420
8	Disc Washer	Carbon Steel	A276-304	Carbon Steel
9	Disc Nut	Carbon Steel	A194-7	Carbon Steel
10	Disc Nut Pin	Carbon Steel	A276-420	Carbon Steel
11	Gasket	Spiral Wound(Graphite+304)
12	Stud	A193-B7	A193-B16	A320-L7
13	Stud Nut	A194-2H	A194-7	A194-4
14	Eyebolt(2)	Carbon Steel

Note:
l) Cast steel disc for NPS 4" and above.
2) NPS 6" & larger.
3) Disc and seat ring may either be solid facing material or a base material equal to or better than the body/bonnet material with facing as shown.

Features
Size: 2"~56"
Pressure Rating: Class 150 ~2500
BC,Bolted Cover;PSC,Pressure Seal Cover
Renewable Seat Rings
Flange or Butt Welding

Specifications
Design: 608, 6D,BS5351,ASMEB16.34
Face to FacerASME B 16.10, 6D
End Flange: ASME B 16.5/BS EN1092/ASME 16.47
BW Flange: ASMEB16.25
Pressure Temp: ASME 16.34
Test: 598,ISO5208, 6D
Special : NACE MR-01-75